Brooklyn Stair Railings fabricates bright, low-maintenance stainless steel railings for modern stairs, balconies, and entries. Stainless is the premium metal for a contemporary look: it resists corrosion, needs no paint, and carries a brushed satin or mirror-polished finish that lasts. We TIG-weld the frame in our shop for clean, tight joints, then grind and polish the welds so they vanish into the finish. The result is a sleek, durable railing that fits a new condo or a gut-renovated brownstone.
Not all stainless is equal, and the grade matters in Brooklyn. Type 304 is the standard architectural stainless and is ideal for interior stairs and protected entries where it will stay bright with minimal care. Type 316 adds molybdenum, which sharply increases resistance to the chloride corrosion driven by road salt and salt air, so it is the grade we specify for exterior railings and for anything near the water in Bay Ridge, Sheepshead Bay, or along the waterfront. Using 304 outdoors in a coastal exposure invites tea-staining and pitting, so matching the grade to the location is a decision we make with you up front rather than defaulting to the cheaper metal.
Stainless demands a cleaner weld than ordinary steel, so we TIG weld the frame, which gives precise, contamination-free joints suited to a metal that shows every flaw. Once welded, the joints are ground and blended into the surrounding finish so there is no visible seam, then the whole railing is brought to a consistent brushed satin or mirror-polished surface depending on the look you want. A brushed finish hides fingerprints and everyday wear, while a polished finish is dramatic but shows more. Because stainless never needs paint, the finish we put on in the shop is the finish for the life of the railing, which is why the welding and polishing are done with real care.
Stainless posts pair naturally with a range of infill to suit a modern Brooklyn interior. We build stainless frames with tensioned cable for a nearly transparent run, tempered glass panels for a solid but open barrier, or slim vertical stainless balusters for a cleaner take on a traditional layout. Whatever the infill, the assembly is fabricated to fit your staircase or balcony, welded rigid, and built to the roughly 42-inch guard height with 4-inch-compliant spacing. Mixing stainless with glass or cable is how we get a railing that feels light and current without giving up strength.
Type 316 stainless railings hold up on exterior and coastal-facing installs across Brooklyn, including Bay Ridge, Brooklyn Heights, Greenpoint, Williamsburg, and Dyker Heights.