Brooklyn Stair Railings fabricates and installs commercial railings for retail, offices, restaurants, and multifamily buildings across the borough. Commercial work runs on code compliance, durability, and schedule, so the railings have to be built stout, meet the applicable guard and handrail rules, and go in on the buildout timeline. We field-measure the site, fabricate welded steel or stainless railings in our shop, and install them anchored to structure. The result is a rugged, inspection-ready railing built for public traffic and daily commercial use.
Commercial and multifamily buildings have railings that public occupants rely on, so the code is stricter and the loads are higher. Egress and common stairs, mezzanines, and any public drop take a guardrail at roughly 42 inches with infill that meets the 4-inch rule, plus a continuous graspable handrail at the 34 to 38 inch height along every flight. We fabricate these from heavy-gauge steel or stainless, weld them stout enough for constant traffic, and anchor them hard to structure so they hold up to years of hands and shoulders. Building to the commercial standard from the field measurement is what carries a railing through inspection in a retail, office, or apartment setting.
Commercial railings do design work as well as safety work. A restaurant may want a stainless or ornamental rail separating a raised dining area, a storefront may need an entry handrail and an ADA-conscious ramp rail, and an office lobby may call for a feature stair rail in glass and stainless. We fabricate to the look the space is going for while holding the commercial code, so the railing is both a finished design element and a compliant barrier. Because everything is built in one shop to one spec, the detail stays consistent across an entry rail, a stair rail, and a guard on the same project.
A commercial buildout runs on a schedule, and slow trades hold up the opening, so we field-measure early, fabricate off-site while other work proceeds, and install on the timeline the project needs. The railings themselves are built for a harder life than a home rail sees, with heavier material and finishes chosen for public wear, whether that is a powder coat that resists scuffing or galvanized-and-coated steel on an exterior stair. Matching the build and the finish to constant commercial use is what keeps a railing from looking beaten and working loose a year after the space opens.
Commercial and egress-stair railings are built to plan for buildings across Brooklyn, including Bushwick, Bed-Stuy, Crown Heights, Fort Greene, and Bay Ridge.