Brooklyn Stair Railings fabricates guardrails for balconies, landings, and mezzanines where a fall has to be guarded. A level guardrail follows the same rules as a stair rail but runs flat, so the layout and the anchoring shift accordingly. We field-measure the opening, fabricate the railing in our shop from steel, stainless, wrought iron, or glass, and install it anchored solidly into the floor or slab edge. The result is a rigid, code-compliant barrier that suits the space, from a brownstone landing to a modern loft mezzanine.
An interior landing at the top of a stair or a loft mezzanine over an open room is a drop, and it needs a guardrail built to roughly 42 inches with balusters spaced under the 4-inch rule. These runs are usually level rather than raked, which changes how the balusters and posts lay out and where the loads land. We fabricate the railing to the length and shape of the opening, weld it rigid, and anchor the posts into the floor framing or the edge of the slab so the barrier cannot shift when someone leans on it. On a brownstone landing we can carry the same wrought iron pattern used on the stair, and in a loft we can run steel, cable, or glass to match the space.
Balconies, whether an interior Juliet-style rail across a tall window or an exterior projecting balcony, take the full guardrail treatment. Indoors we build from steel, stainless, wrought iron, or tempered glass to match the interior. Outdoors we shift to galvanized steel or 316 stainless and finish it against the weather, because a balcony rail lives fully exposed. The material decision follows both the look you want and the exposure, and we walk through it before fabricating so a waterfront Bay Ridge balcony gets a corrosion-rated build while an interior rail can be chosen purely for style.
A guardrail is only as safe as its connection to the building, and a balcony or landing rail carries real outward force when a crowd leans on it. We anchor posts into solid floor framing, into the slab, or through the slab edge with the right fasteners for the substrate, never into finish material alone. On an exterior balcony we detail the connection to keep water out of the structure so the anchor does not become a leak or a rust pocket. Getting the anchoring right is the difference between a rail that passes inspection and holds for decades and one that works loose.
We weld and set balcony and landing guardrails throughout Brooklyn, including Fort Greene, Williamsburg, Brooklyn Heights, Park Slope, and Carroll Gardens.